NEW 90° ANGLED FILLER PANEL – FLUSH - HORIZONTAL
Introducing the new designed 90° angled filler panel – flush – horizontal, that will be shipped loose for ease of scribing to ceiling. After scribing the front filler piece, glue and connect the two pieces using the ¼ MDF unfinished spline on site, which makes a strong and even joint. A 2” cleat is included for installation. The designer or installer can choose to have a flush reveal or 1/8” reveal to help with the design. This comes in horizontal grain only. As an option the designer can add lighting modifications to improve the Zonavita design.
POSSIBLE REVEAL OPTION
- Depending on the orientation of the back piece, a 1/8” reveal can be created
- Since the parts ship loose, the installer can decide on site if they need the 1/8” reveal or flush reveal by rotating the back part accordingly
- The 1/8” reveal option is not possible with UV Lacquer since UV Lacquer is only available on one side.
- The 1/8” reveal option is not possible if lighting mods are applied.
STEP DESIGN OR FLUSH DESIGN
- Designers can choose between the old, step design or new, flush design
Insertion
FLUSH DESIGN
OPTIONAL LIGHTING AS MODIFICATION
- Designers can choose to add lighting to enhance the Zonavita design
OPTIONAL OVER WINDOW PANEL
- Designers can use as an over window panel
BENEFITS
- Designers can choose between step or flush design
- Parts shipped loose to provide ease of installing
- Easier to scribe
- Installer can create flush reveal or 1/8” reveal
- No mitre cuts
- Avoids dangerously sharp edges that can be easily dented
- Mitre cuts can also open up over time
- Banded on all edges
- Protects the panel from dents
- Option to add lighting as a modification
- Option to use as an over window panel
